IPMS ES forum v2.1

General Category => Works In Progress => Topic started by: Ryan K on Mon 08/09/10 03:50 PM

Title: Vision 1/35 BA-64B
Post by: Ryan K on Mon 08/09/10 03:50 PM
I saw Bill's build and for some reason I had to get one.  http://modelingmadness.com/review/misc/vehicles/russia/kop64.htm

So the kit has a few issues, one of the biggest is that Fred's feet doesn't power this beast. It's missing the engine, so I robbed one from my Willy's Jeep. I hacked off the jeep transmission case section from the engine and used some styrene to block the bits off. Built an oil pan and blocked off other bits. Next I punched some circles and added them to 64's transfer case. Need to add some putty to smooth things out. Using the jeep parts again, I built a radiator and blocked off the underside to other bits on that part. Finally I built the non existent fuel tank, it's not great but I think it will do. It is all black and with a green floor and white sides it will stand out when you look down from the top of the turret as it sit to the rear of the 64.

(http://i182.photobucket.com/albums/x17/zky1812/020.jpg)
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Sat 08/14/10 11:25 AM
A little update.
(http://i182.photobucket.com/albums/x17/zky1812/001-1.jpg)

I didn't like the left strap on the fuel tank and removed some, still not great but no more messing with it.
(http://i182.photobucket.com/albums/x17/zky1812/007.jpg)

Built the map holders and door locks/handle.
(http://i182.photobucket.com/albums/x17/zky1812/006-1.jpg)
(http://i182.photobucket.com/albums/x17/zky1812/005-1.jpg)
(http://i182.photobucket.com/albums/x17/zky1812/004-3.jpg)
(http://i182.photobucket.com/albums/x17/zky1812/003-1.jpg)

Added a gas and brake petal.
(http://i182.photobucket.com/albums/x17/zky1812/002.jpg)

Only a few parts left on the sprue: steering wheel, two cargo hooks, tools and mg. After the paint barn, I will add the fuel line before putting together the top and bottom section.
Title: Re: Vision 1/35 BA-64B
Post by: Anthony Leger on Sat 08/14/10 11:33 AM
Nice bit of scratchbuilding :)
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Sat 08/14/10 02:31 PM
Thanks.
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Wed 10/08/14 09:06 PM
Dusting this one off again. Where it stands now. Wow from 4 years ago.  :o

(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-5.jpg) (http://s182.photobucket.com/user/zky1812/media/Mobile%20Uploads/image-5.jpg.html)

I don't recall what I couldn't figure out that stopped the project for all these years. Hope to paint some more small parts, final assemble and weathering to finish this up.
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Wed 11/19/14 09:17 PM
I didn't like the colors I had used so basically repainted everything. I muted the green on the body and black on the tires.

(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-10.jpg)

(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-11.jpg)

(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-12.jpg)

Things left are the exhaust, machine gun and weathering.
Title: Re: Vision 1/35 BA-64B
Post by: JonE on Thu 11/20/14 12:29 PM
I double dog dare you to finish it.... looking good. I like little fighting vehicles.
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Thu 11/20/14 01:13 PM
Quote from: JonE on Thu 11/20/14 12:29 PM
I double dog dare you to finish it....

Don't you put that evil on me Ricky Bobby!

Thanks Jon.
Title: Re: Vision 1/35 BA-64B
Post by: Ryan K on Sat 11/29/14 08:12 AM
A little closer, only to finish painting the red on the tail light and paint and install the gun.

(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-15.jpg)
(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-16.jpg)
(http://i182.photobucket.com/albums/x17/zky1812/Mobile%20Uploads/image-17.jpg)