GP FJ-4B

Started by Ryan K, Wed 06/16/10 07:57 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ryan K

Quote from: Lee_K on Sat 06/19/10 09:53 AM
Nice work, dude.  Are you doing a FJ-4 or -4B?

Lee K

Got to be difficult, the 4B. IIRC the differences are the bulge at the front landing gear and the buno's. Everything else is internal.

Lee_K

Nice work, dude.  Are you doing a FJ-4 or -4B?

Lee K

Ryan K

Quote from: Joe M on Thu 06/17/10 07:14 AM
That's one awfully aerodynamic tank!  :D

Sometimes I go to the dark side.  ;D



Cut the trenches and sanded everything on wing for a decent fit. I have one wing gluing and do the other tonight. Added the speed brake strikes, need to clean them up after the glue sets. Going to start on the pit detail next and things will slow down as we hit the paint barn.

Joe M

That's one awfully aerodynamic tank!  :D

Anthony Leger

Looking good so far :)

Ryan K

#1
Some work done.....






I started to hollow out the wings for the resin bays and have some nice canyons already cut out. Still need to thin the resin a little be and it should be done. Things left to scratch build on the kit: FOD cover, fuel vent off the back of the tail, and brake lines/pads. I think everything will be out of box, unless I see or someone points out something else that is easy to do.